10Base2 - Ethernet specification for thin coaxial
cable, transmits signals at 10 Mbps (megabits per second) with a
distance limit of 185 meters per segment.
10Base5 - Ethernet specification for thick coaxial cable, transmits signals at 10 Mbps (megabits per second) with a distance limit of 500 meters per segment.
10BaseF - Ethernet specification for fiber optic cable, transmits signals at 10 Mbps (megabits per second) with a distance limit of 2000 meters per segment.
10BaseT - Ethernet specification for unshielded twisted pair cable (category 3, 4, or 5), transmits signals at 10 Mbps (megabits per second) with a distance limit of 100 meters per segment.
100BaseT - Ethernet specification for unshielded twisted pair cabling that is used to transmit data at 100 Mbps (megabits per second) with a distance limit of 100 meters per segment.
1000BaseTX -Ethernet specification for unshielded twisted pair cabling that is used to transmit data at 1 Gbps (gigabits per second) with a distance limitation of 220 meters per segment.
100BASE-T4 = Utilizes four pairs of telephone-grade twisted-pair wire and is used for networks that need a low-quality twisted-pair on a 100-Mbps Ethernet
100BASE-TX = Developed by ANSI 100BASE-TX is also known as 100BASE-X, 100BASE-TX uses two wire data grade twisted-pair wire
***
802***
10Base5 - Ethernet specification for thick coaxial cable, transmits signals at 10 Mbps (megabits per second) with a distance limit of 500 meters per segment.
10BaseF - Ethernet specification for fiber optic cable, transmits signals at 10 Mbps (megabits per second) with a distance limit of 2000 meters per segment.
10BaseT - Ethernet specification for unshielded twisted pair cable (category 3, 4, or 5), transmits signals at 10 Mbps (megabits per second) with a distance limit of 100 meters per segment.
100BaseT - Ethernet specification for unshielded twisted pair cabling that is used to transmit data at 100 Mbps (megabits per second) with a distance limit of 100 meters per segment.
1000BaseTX -Ethernet specification for unshielded twisted pair cabling that is used to transmit data at 1 Gbps (gigabits per second) with a distance limitation of 220 meters per segment.
100BASE-T4 = Utilizes four pairs of telephone-grade twisted-pair wire and is used for networks that need a low-quality twisted-pair on a 100-Mbps Ethernet
100BASE-TX = Developed by ANSI 100BASE-TX is also known as 100BASE-X, 100BASE-TX uses two wire data grade twisted-pair wire
***
| IEEE 802.11 The initial release of the standard capable of transmissions of 1 to 2 Mbps and operates in the 2.4 GHz band. IEEE 802.11a Capable of transmissions of up to 54 Mbps and operates in the 5 GHz band. IEEE 802.11b Introduced in 1999, 802.11b is capable of transmissions of up to 11 Mbps and operates in the 2.4 GHz band. IEEE 802.11c Defines wireless bridge operations IEEE 802.11d Defines standards for companies developing wireless products in different countries. IEEE 802.11e Defines enhancements to the 802.11 MAC for QoS. IEEE 802.11f Defines Inter Access Point Protocol (IAPP) IEEE 802.11g Capable of transmissions of up to 20 Mbps and operates in the 2.4, 3.6, and 5 GHz bands. IEEE 802.11i Improved encryption (WPA). IEEE 802.11j 802.11 extension used in Japan. IEEE 802.11n Operates using the 2.4GHz and 5GHz bandwidths. It utilizes multiple-input, multiple-output (MIMO) antennas to improve data transfer speeds. | |
0 comments:
Post a Comment